Unitex® Dry Seal

Unitex® Uni-Substrate Sealer Applied over porous, dry textured surfaces, such as Unitex Veneto, Dry-Texture Range and Uni-Rock, Dry Seal provides excellent hydrophobic water pearling/beading effect, forming a physical barrier to water and migration
while maintaining substrate breathability. Apply directly from pail. Coverage is 5-15m2/L (1-2 coats dependant on substrate).

Size: 5L or 15L pail

Coverage: 5-15m2/L (1-2 coats dependant on substrate)

Suitable for: Unitex Dry Textures, Veneto, Uni-Rock and Redi-Texture

Apply with: Roll, Brush, Spray, or sponge for very smooth surfaces

Safe Use: Refer to the SDS

Site Requirements:

  • Provide complete system in-situ sample for Architect and Builder approval
  • Apply only onto clean, dry and well-bound surfaces
  • Mask up all adjoining surfaces, windows, and non-masonry works
  • All mastic-filled expansion joints to be complete and dry prior to Unitex® DrySeal application
  • No cold joints – complete all areas floor to floor, and from control joint to control joint

When applying Unitex® DrySeal please consider the following:

  • Apply between 100C and 350C ambient temperature
  • Allow 2 hour drying time before top coating in Summer, and 4 hours in Winter
  • Apply only after all Textures, patching repairs and expansion joint mastic are dry and cured