Lightweight cladding, acrylic renders, decorative finishes, and architectural profiles — supplied to builders and applicators across Sydney and New South Wales.

Supplying Sydney Builders and Applicators

Unitex has been manufacturing quality building products for Australia’s construction industry since 1983. In Sydney and across New South Wales, Unitex products are used across a broad spectrum of residential and commercial projects — from volume housing programmes in Sydney’s growth corridors through to boutique custom builds, multi-unit developments, and commercial facade refurbishments.

New South Wales is Australia’s largest construction market. It is also one of the most diverse in terms of building conditions — coastal exposure across the Eastern Suburbs, Northern Beaches, and Illawarra, bushfire risk zones across the Blue Mountains, the greater Sydney Basin fringe, and regional NSW, and the thermal demands of Sydney’s warm, humid summers. Unitex products are formulated and accredited specifically for these conditions.

Unitex products are available for pickup from the Unitex Render Warehouse (URW) branch at 14 Artisan Road, Seven Hills NSW 2147, open Monday to Friday from 6:30am. Delivery is available to job sites across Sydney and throughout New South Wales.

Unitex Products for Sydney Builders and Applicators

Lightweight Cladding Systems

The Unitex Base Board System is a CodeMark-accredited EIFS — an integrated assembly of EPS insulation, polymer render coating, and fibreglass mesh reinforcement that is significantly lighter than brick veneer and delivers up to R-2.6 full wall thermal performance with 75mm Base Board. Available in cavity and non-cavity configurations, with BAL 29 and BAL 40 certified system options for construction in bushfire-prone areas across greater Sydney and regional NSW.

For Sydney builders navigating NCC energy efficiency requirements, the thermal performance advantage of the Unitex Base Board System over rendered brick veneer is commercially significant — approximately 400% more energy efficient at equivalent cost.

Base Coat Renders

The Unitex base coat render range covers a wide variety of substrate types and project conditions — including non-combustible products certified to AS 1530.1 by CSIRO, and the purpose-formulated Base Board Render BBR 8.5 for use within the CodeMark-accredited Base Board System. Powder and pre-mixed wet formulations are available to suit different site logistics and application preferences.

Textures & Finishes

From traditional graffiato and roll-on textures to the innovative Tanami polished concrete finish and Veneto mineral coloured finish, the Unitex texture range gives Sydney builders and applicators the aesthetic flexibility to deliver any facade design intent — from contemporary minimalist to heritage-influenced — without compromising on weather resistance or durability in Sydney’s coastal and variable conditions.

Uni-Shape® Profiles & Columns

Uni-Shape® lightweight architectural profiles cover the full range of facade detailing — columns, window architraves, keystones, parapets, corbels, stringers, pilasters, fence capping, and more. For Sydney’s volume housing market, where architectural detailing is a key differentiator between builders and projects, Uni-Shape® profiles deliver genuine character at a fraction of the cost and installation time of traditional masonry alternatives.

Paints, Primers & Sealers

Unitex substrate sealers, protective topcoats, and surface sealers complete the render system — ensuring proper preparation, consistent adhesion, and long-term surface protection. For Sydney projects with coastal exposure or north-facing elevations with intense UV loading, Uni-PTC protective topcoat is particularly valuable in extending the service life of the facade finish.

Why Sydney Builders Choose Unitex

Sydney’s bushfire risk zones extend across a significant portion of greater Sydney — from the Blue Mountains and Hawkesbury in the west, through to the Royal National Park fringe in the south, and the hills districts of the north. For builders working on these sites, BAL-rated cladding systems are not optional — they are a requirement for building approval.

The Unitex Base Board System (BAL 29) and Uni-Base Board System (BAL 40) are independently tested and certified for construction in Bushfire Attack Level 29 and 40 zones respectively. This opens project types and locations that non-accredited cladding products cannot access — a meaningful commercial advantage for NSW builders.

Beyond bushfire, Sydney’s coastal exposure demands products that perform in salt-laden air, wind-driven rain, and high UV environments. Unitex base coat renders and texture finishes are formulated for Australian coastal conditions, and the non-combustible render range provides additional compliance assurance for projects where fire performance requirements apply to the render layer.

CodeMark, BRANZ, and BRAC accreditation — covering both cavity and non-cavity Base Board systems — means Sydney builders and certifiers can rely on deemed-to-satisfy NCC compliance without additional engineering approval. That certainty reduces approval risk and speeds construction programmes.

The Unitex Render Systems team in Sydney supports builders, applicators, and certifiers across metropolitan and regional NSW.

Talk to the Unitex Team in New South Wales

The Unitex technical sales team supports Sydney and NSW builders with product selection, system specification, quotations, and project-specific technical advice.

URW Sydney (Seven Hills): 14 Artisan Road, Seven Hills NSW 2147 — Monday to Friday, 6:30am–3:30pm
Call: 1800 RENDER (1800 736 337)
Email: sales@unitex.com.au
Quote requests: Submit plans via the Plan Quote Service at https://www.unitex.com.au/plan-quote-service/