Unitex Uni-Bagging Finish

Provides a course covering to rough non-rendered masonry surfaces. Can also be applied with a broom (brooming finish), mitten (hand rubbing), and traditional bricklayers bagging process. A simple and easy to apply product that requires minimum skill level.

Download the Unitex Texture Brochure here.

Download the Unitex Texture Installation Manual here.

This texture product can be tinted or colour matched to almost any colour.

NB: Some Deep Tone colours, and all colours within close proximity of breaking surf, require a minimum of 2 coats of Unitex PTC or Unitex Membrane. Please contact your Unitex Representative for further information.  Deep tone colours are not always suitable for exterior application

Additional Information

Refer to Unitex Uni-Roll Décor (Medium to coarse – 109, 110)
Unitex Cembond Substrate Sealer
Either Uni-Roll Décor 109 for fine bagging, or Unitex Uni-Roll Décor 110 for coarse bagging.

Bagging refers to the method of application.  In the case of Unitex Roll-On texture products 109 and 110, they are highly recommended to be applied with broom, distemper brush or mitten to create this economical rough cast surface.

Dark colours and areas within 1km from breaking surf must be overcoated with a minimum 2 x coats Unitex PTC or Membrane.

Any deviation from these instructions requires written specification from Unitex.