Accreditations

When specifying accredited systems under CodeMark, BAL 29, and BAL 40 the Specifier is fully protected as the Unitex Baseboard System is deemed to satisfy all requirements of the Building Code of Australia (BCA/NCC).

Unitex is proud to be fully accredited by the following professional building industry regulators:

BRAC – Certificate no. V11/03 Non-cavity System (system document review)

BRANZ – No. 758 (2011) Cavity System (full system full wall laboratory testing)

CodeMark – SAIG-CM20026.  Certificate no. CM20026 Cavity System (full system full wall laboratory testing; full manufacturing process & procedures; quality audits)

BAL 29 – Certificate no. SFC 2856500.1 (full system with 75mm pre coated Base Board sheets, 8mm Unitex BBR Render, 3mm Unitex Texture 855, added Unitex Levelling Base Blocks, added Unitex Sill Blocks)

BAL 40 – Certificate no. SFC 2830900.1 (full system with 75mm pre coated Base Board sheets, 14.5mm Unitex BBR Render, 3mm Unitex Texture 855, no aluminium angles, added Unitex Levelling Base Blocks, added Unitex Sill Blocks)

CSIRO (previously – now ceased to be provided)

ABSAC (previously – now ceased to provided)

Unitex recommends the following specification clause:

Unitex Baseboard System – CodeMark accredited to comply with the Building Code of Australia – the leading Australian CodeMark accredited full system.

Unitex recommends for you and your clients safety and protection to PC Unitex Baseboard System as your external cladding. This is because it ALWAYS works, and offers the highest wall insulation R-values available for greener buildings. As the leading fully accredited full cladding system in Australia – your design specification and reputation is firmly protected.